Inductance of single-layer coils on cylindrical winding forms

mean radius (a m)
length (l m)
number of turns
relative permeability
compute

Input the mean radius, length and number of turns of a coil then press 'compute' button.

If the number of turns is set to zero, only the Nagaoka coefficient will be computed.

Probably no other type of coil is so widely used as a simple helical winding, such as is obtained by winding a single layer of wire on a cylindrical form. Single-layer coils have the advantage, not only of simple and inexpensive construction, but the effective (distributed) capacitance of the winding is small. For this reason, they are especially useful in high frequency application, except where higher inductances are required.

The calculation of the inductance of single-layer coil is based on formulas for a cylindrical current sheet, that is, a winding where the current flows around the axis of a cylinder of infinitesimal radial thickness on the surface of the cylinder. Except in the case of very open helical windings, the inductance of a single-layer coil is closely equal to that of a cylindrical current sheet having the same number of turns N as the coil, the same mean radius a, and length l equal to the number of turns in the coil times the distance between centers of adjucent wires.

An exact formula for the inductance of a cylindrical current sheet was first found in 1879 by Lorenz(1), who integrated the expression for the mutual inductance of two equal coaxial circular filaments twice over the length of the current sheet. Lorenz's formula is in elliptic integrals and involves both positive and negative terms.

In early days when man have no electronic computers, many forms of series aproximations and tables are developed. Among of them, Nagaoka's formula (2) is widely used till now. 

  L = K*u*PI*a*a*N*N/l
  where
	L = inductance of single-layer coil (H)
	K = Nagaoka coeeficient (0 < K <= 1)
	u = permeability (4e-7*3.1415.. for bacuum, air or nonferrous material)
	a = mean radius of coil (m)
	l = length of coil (m)
	N = number of turns of windings
	PI = 3.14159265..
If K equal to 1, this foumula expresses the inductance per unit length of infinite single-layer coil.

References

(1) Lorenz, Wied. Ann. 7, 161 (1879); B. of S.Sci. Paper 169, 117.
(2) Nagaoka, Jour. Coil. Sci. Tokyo 27, 18-33, art. 6 (1909); B. of S. Sci. Paper 169, 64.